Termékek kávézó berendezési elemek (478)

Product Features: • Heavy duty design with plastic shell and double wipe contacts. • Indoor use only. • Allows for ground connection between equipment and international power sources. • With a set of all 4 adaptors, they will accept equipment with plugs from virtually every country except South Africa. • Adaptors do not affect voltages, they are a mechanical device only to match foreign "pin-outs" of receptacles and/or plugs.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Pin type (0.25" length and 0.035" diameter), P.C. board mount. • Low profile, open type construction. • Frequency response 200 Hz. - 50 Khz. (+/- 1 db, ref. @ 1 Khz.). • Net weight 0.6 oz.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Intended for non-patient connected indoor applications where protection of sensitive electronics is required: • High end audio / studio use • Medical electronics • High end test equipment / laboratory • cULus Listed to UL 60601-1 (1st Edition) and CAN/CSA-C22.2 No. 601.1-M90 (R2005). • Each unit provides complete line isolation and noise filtering plus utilizes a Faraday shield to reduce leakage currents below UL60601-1 requirements (under 100 microamps). • Reduced noise coupling due to floating AC output. • Not included to be used to supply power to life support appliances. • 3 Different VA Capacities available - 500VA, 1000VA and 1800VA. All rated 50/60 Hz. • 4 Different electrical configurations: • 120V-120V Straight isolation ("178" Series) • 240V-240V Straight isolation ("240" Series) • 240-120V Step down isolation ("289" Series) • 120-240V Set up isolation ("298" Series)

Product Features: • Small, economical, open, two hole horizontal bracket mount. • Insulated, colour coded flexible leads, 4" long minimum (143, 144 and 145 Series) or 3" long minimum (146 Series). • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.). • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher. • Net weight: 0.5 oz. (143, 144, 146 Series) and 1.4 oz. (145 Series).

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for general purpose or replacement use in push-pull or phase inverter tube driver circuits. • Should not be used for single ended applications. They have no gap for DC bias current present in SE mode. • Open style with minimum 5" long primary leads. • Minimum frequency response 150 Hz. - 15 kHz. (+1 /- 3db) @ 1 kHz. • Part number 124B is the same as 124A except for 49% Nickel laminations for greater fidelity. • Part number 124C is the COIL ONLY.

EQ212 crystals are the smallest package currently available. The ultra-miniature SMD crystal, dimensions 2.0 x 1.2 x 0.6mm is available at 32.768kHz . Frequency 32.7680kHz Miniature package: 2.0 x 1.2 x 0.6mm Low mass, rugged construction Amongst the smallest possible crystals at 32.768kHz. Ideal for miniature, battery-powered equipment Nominal Frequency:32.7680kHz Calibration Tolerance at 25ºC:±20ppm or ±50ppm Turnover Temperature:+25±5°C Temperature Coefficient:(-3.5±1.0)x108/°C2 Operating Temperature Range:-40 to +85°C Load Capacitance (CL):12.5pF or 9.0pF Equivalent Series Resistance (ESR):90kW max Drive level:0.1µW typical 0.5µW max Ageing:±5ppm per year Insulation Resistance:500MΩ minimum @100VDC Crystal Cut:X-Cut Reflow Soldering:10s maximum at 260°C twice or 180s at 230°C, once Packaging:EIA tape and reel

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Studio grade frequency response: 20 Hz. - 20 Khz. (+/- 1 db, ref. @ 1 Khz.) minimum. • Excellent frequency response utilizing a 80% nickel core providing high permeability combined with low losses. • Designed for maximum bandwidth, lowest distortion at +10 dbm power level. • Plated steel cans. • Adjustable height case bracket. • Net weight 3 oz.

Product Features: • Sealed "gapped" core modulation transformer design. • Minimum frequency response of 150- 7000 Hz. • Range of secondary taps for a variety of tube types. • The tapped secondary winding carries full class C plate current.

CXOMK oscillators are miniature, surface mount units packaged in a 6.5 x 5.0 x 1.5mm package. Ultilizing the latest advancements in production technology, the CXOMK oscillator is capable of achieving close tolerance frequency calibration and high stability over a wide temperature range. High shock resistance. The part is available with full 'MIL' testing if required. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. CMOS/TTL Compatible High shock resistance Optional Enable/Disable with Tri-State Low EMI emission Full military testing available Hermetically sealed package Frequency Range:200.0kHz to 220.0MHz Supply Voltage1:+0.9 to 5.0Volts ±10% Calibration Tolerance2:±30ppm Frequency Stability over Operating Temperature Range3 Commercial (0° ~ +70°C):±15 to ±50ppm Industrial(-40° ~ +85°C): ±30 to ±100ppm Military Output Load (CMOS)4:15pF Start-up Time:5ms maximum Rise/Fall Time:6ns maximum Duty Cycle:40% min., 60% max Ageing First Year:±10ppm Shock, Survival5:5000g, 0.3ms, ½ sine Vibration Survival6:20g, 10~2000Hz swept sine Operating Temperature Ranges Commercial:-10° to +60°C Industrial: -40° to +85°C Military: -55° to +125°C

Offering a wide range of current transformers, current and voltage transducers, inductors, line reactors and transformer and mu metal cores.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Pin type, miniature size, P.C. board mount, net weight of only 0.1 oz. • Rugged potted construction produces a completely sealed unit withstanding severe environmental conditions. • Secondary may be used as primary and primary as secondary. • Power level: Minimum frequency range: 300 Hz. to 100 Khz. +/- 0.5 db @ 100 mw. • Frequency range @ +10 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +15 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +20 dbm is 300 Hz. to 100 Khz. +/- 0.5 db • Frequency measurements with no D.C. current saturation 101D

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • 117/234 VAC - 50/60 Hz. dual primary. • Secondaries are either center tapped (C.T.) or dual secondaries for added versatility. • Open style, 4 hole frame chassis mount. • Minimum 6" long leads or copper tabs with holes. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (#LR209651).

Product Features: • Single winding, does not provide isolation, for use where equipment is already isolated and only voltage changed is required. • Flexible world wide applications, 50 or 60 Hz. operation, step down (230VAC to 115VAC) or step up (115VAC to 230VAC). • Connections by flexible leads, 8" minimum length. • Models 170A, 170B, 170C and 170D are CSA certified (209651). • Remember - These units do NOT convert line frequency.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Miniature cylindrical crystal with AT-CUT strip crystal priding low mass with small size. Frequency range 3.579MHz to 70MHz. Frequency range 3.579MHz to 70.0MHz Fundamental mode to 30MHz Low mass, miniature cylindrical package Frequency Range Fundamental Mode:3.579545MHz to 30.0MHz 3rd Overtone: 30.0MHz to 70.0MHz Crystal Type:AT-Cut Frequency Adjustment at 25ºC:±15ppm to ±100ppm Stability over Temperature:±5ppm to ±100ppm Operating Temperature Range:0° to +50°C or -10° to +60°C Static Capacitance (C0):7pF maximum Load Capacitance CL):8pF to 50pF or Series Ageing:<±5ppm per year at +25°C Maximum Drive level:0.1 mW max Reflow Soldering:10s maximum at 250°C twice or 180s at 230°C, once Insulation Resistance:100MOhm min Shock Resistance:±5ppm max. (Drop test 3 times onto a hard board from 75cm) Holder:Compression press fit

EQ156 crystals provide 32.768kHz in an ultra-miniature package. The part is designed to provide the smallest possible component size for real-time clock applications. Their miniature size and rugged construction make them ideal for battery powered, hand-held equipment. Frequency 32.7680kHz Ultra-miniature package: 3.2 x 1.5 x 0.9mm Low mass, rugged construction Packaged in standard EIA tape and reel Miniaturized 32.768kHz crystal for real-time clock applications The part is ideal for battery powered, hand-held equipment Nominal Frequency:32.7680kHz Calibration Tolerance at 25ºC:±20ppm Operating Temperature Range:-40 to +85°C Storae Temperature Range:-55 to +125°C Load Capacitance (CL):12.5pF or 7.0pF Motional Capacitance (C1):3.6fF typical Shunt Capacitance (C0):1.0pF typical Equivalent Series Resistance (ESR):70k Ohms Drive level:0.5 micro Watt maximum Temperature Coefficient:-0.04/°C2 maximum Turnover Temperature:+25°±5°C Ageing:±3ppm per year Insulation Resistance:500MΩ minimum @100VDC Crystal Cut:X-Cut Reflow Soldering:10s maximum at 260°C twice or 180s at 230°C, once Packaging:EIA tape and reel

Product Features: • Primary 120VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operation and low profile. • World wide applications, 50 or 60 Hz. operation, step down (120VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed for push-pull tube output circuits. • Enclosed (shielded), 4 slot, above chassis Type "X" mounting. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • Manufactured with plastic coil forms for coil support and insulation. • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. • Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications.

Product Features: • Couple 3.2, 8 or 16 Ohm speakers to 25 or 70 volt line outputs of amplifiers. • Up to 5 power tap levels available (except 117F2 which has 4). • Primary taps marked in watt (no calculation necessary), to match speaker power. • Frequency response 100 Hz. to 9 Khz. (1 db. reference @ 1 Khz.). • Insertion loss less than 2 db. • Distortion is less than 1.25" @ 100 Hz. at maximum power. • Horizontal, channel bracket, 2-hole (.187" dia.) mounting. • All models have solder lugs, also suitable for slip on jumper connections. • Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.

Product Features: • "Over designed" for high fidelity, single ended, Class-A, tube output circuits (triode, tetrode or pentode tubes). • Enclosed (shielded), four slot, chassis Type "X" mounting. • Frequency response at least 20 Hz. to 20 Khz. at full rated power (+/- 1 db max., ref. 1 Khz). • Insulated flexible leads 8" min. • For maximum versatility, all units (except the 1642SE and 1638SEA do NOT include this screen tap as they were designed principally for high impedance triode tubes. • High quality laminations, (M6) grain oriented silicon steel. • Core is gapped to reduce core saturation in Class-A tube amplifier circuits.